Chassis Dyno Rental
For rent we offer a DYNOmite 20" roller inertia dyno capable of 2000HP to the wheels, complete with 4 post lift to make loading and unloading your vehicle easy and safe. Dyno cost is $100/hr to rent for your own personal pulls or tuning , $140/hr with us tuning for you, with a two hour minimum. Unlimited pulls, and you can team up with a friend (or more) and use it all day by the hour to to make pulls on multiple cars if you want. Do pulls to check power, or bring method of tuning (box of jets, laptop, etc) to make pulls, change the fuel and ignition, and see what changes you can make with consistency to maximize the power you get from your car.
Contact us to make your appointment!
Our lift is 160" long to load a car, from the dyno to the front wheel stops. From the center of the roller to clear the rear post of the lift is 22". Measure your car to make sure you'll fit! From the center of the rear wheel to your door needs to be over 22 inches, or you won't be able to open your door once strapped down to the dyno. Our Trans Am barely doesn't clear, we have to get in and out of the car through the T-tops. So measure to make sure you're going to fit!
Disclaimer for those that use our chassis dyno rental services:
Running a car on a chassis dyno puts the vehicle at a very high load and can be dangerous. Red-E Motorsports is not responsible for any damage to people, vehicle, or equipment during any use of the equipment. Use at your own risk, any cleanup from damage during use is the customers responsibility, a liability waiver must be signed before the vehicle gets loaded onto the lift.
